MAGella Side Stream Filter
The MAGella Side Stream Filter is a filter unit for the permanent filtration of water using the bypass method in heating systems.
The bypass process does not affect the volume flow in the respective system.
The MAGella Side Stream Filter is used for magnetite separation and ultra-fine filtration.
If the filter capacity, pressure or temperature is exceeded, an alarm is triggered and the filter unit is switched off immediately.
- Alarm and automatic switch-off if the set parameters are exceeded or not reached
- Automatic switch-off when filter is full
- Powerful magnetite separator with 11 x 12,000 gauss and 1 µm ultra-fine filter
- Pump-controlled bypass filtration
- Documentation of the filtration quantity
- Remote access via BMS: change settings, view statistics, select operating modes
- User-defined time control (normal & continuous operation)
- Bypass filter for fixed installation
- Fully automatic control of filtration
| Max. operating pressure | 8 bar |
| Max. flow rate | 5 m3/h |
| Maximum temperature | 80 °C |
| Filtration | ≥ 1 μm |
| Glycol / water | up to 50/50 |
| Power supply | 230 V |
| Power consumption | 160 W |
| Display size | 4.3“ |
| Weight | 32 kg |
| Housing dimensions (H, W, D in mm) | 992 x 490 x 405 |
| Width with connections | 520 mm |
| Connection | 1 1/2“ BSP G Innengewinde |
| Languages | German, English, French |
- Completely pre-assembled filter unit
- connection 1 1/2’ BSP G female thread
- MAGella twister10
- circulation pump
- flow meter
- pressure sensors
- KFE fill and drain valve